Skip to main content
Version: v1.18

Link Tracker to Object

User flow​

To connect a virtual object with its real-world counterpart, users need to follow a two-step process. First, they must physically attach a tracker or trackers to the physical object. Then, within the virtual reality environment, they can execute the 'Link tracker to object' command, choosing the appropriate tracker from a list and establishing the virtual connection by clicking on the object. Skyreal will seamlessly synchronize the tracker with the object, ensuring that any real-world movements are faithfully replicated in the virtual world.

Before Starting​

Ensure that your real-life object is equipped with the attached tracker and is successfully detected by SteamVR before launching Skyreal. Make sure that the tracker has been assigned a Tracker Role in the Steam VR otpions. end



The user can launch the command "Link trackers" from Skyreal VR's full pie menu, inside the "Tracking" section.

pie menu

Bracelet will launch and show the Link Tracker to Object menu with:

  • Tracker Selection: Combo box with the list of active trackers.
  • Edit Tracker button: Access menu to all tracker bindings info.
  • Reset all Bindings button: Overrides all binding information of every active tracker.

Utilize the combo box to display the list of available trackers, and choose the one you wish to bind. Once the tracker is selected, press on the "Edit tracker binding" button.

pie menu

pie menu

To choose the 3D object for tracker attachment, activate the laser selection by pressing the green "Link Object" button, then select the 3D object in the space VR.

pie menu

pie menu

To help you accurately place your tracker on the desired object, a blue tracker "ghost" appears at the tip of your laser. When you press the controller trigger to bind the tracker, it will attach to the object with the exact position and orientation of the tracker ghost.

Once the object is bound, bracelet will change to "detach object" mode to give the possibility of reset the binding.

pie menu

Edit Tracker position​

Once an object is linked, if the position or orientation of the tracker is not the desired, we have the option to improve tracker's position and rotation by clicking on the button "Edit Tracker Position" and use the bracelet's UI to correct his position '.

pie menu